sle10k miniature power rocker switches rohs compliant csa vde ul features 1. waterproof structure the switches can be used in a place in wetting risk due to the internally sealed structure. the panel sealing performance is equivalent to the ip64 rating. 2. snap-in panel mounting panel cutout from the front side. 3. soldering and tab terminals the switch is structured so that the use of the tab receptacle (#187) or soldering of lead wires can be chosen. 4. ul , csa and vde approved products. part numbering rating load inductive load resistive load inrush current p.f. 1 0.6 125vac 250vac 10a 125vac 6a 250vac p.f. 1 1.0 60a 36a break current p.f. 1 0.9 10a 6a min. rating 10ma 5v ac/dc initial contact resistance 20m 1a 2 ? 4vdc dielectric strength 1,500vac 1 minute insulation resistance 100m min. 500vdc electrical life cycles 10,000 cycles 20,000 cycles operating force 3.92 ? 12.7n operating temperature range 25 ? 85 ? storage temperature range 40 ? 85 ? table of part numbers poles frame color and rocker color switching function terminal style part no. and rating marking side 2 pole black on off tab ? sle10k2 z sle10k2 5 z sle10k2 6 z sle10k2 7 z ? for made-to-order products, we accept orders for indication of letters, codes, etc., on the top surface of the rocker. ? semi-standard products. sle y 10 yy k yy 2 yy y 5 y y z 0 / 0 ' ' " 10 k2 4 f s j f t d p e f current witching function rocker design 5 " # u terminal style 5 6 7 / p o f 6 o g j h v s f e 1 b o f m 4 f b m
j o h sle10k sle10k2 z y dpst tab#187 terminal switching function part no. viewed from part no. & rating marking side sle10k2 z on off sle10k2 5 z sle10k2 6 z sle10k2 7 z connecting terminals 1 2 3 4 terminal numbers are shown on the bottom of the switch. terminal style silver plated tab 187 perforated plastic bags 25 pcs/pack handling precautions the waterproofing performance of sle10k is equivalent to the ip64 rating, but the following precautions must be strictly observed: fig.1. fig.2. 1. waterproof performance (equivalent to ip64 rating) ? although the switch is waterproof-structured, do not use it under the environment where it is under water). ? avoid the use in places where dust accumulates. the waterproof performance and operability may be deteriorated. 2. panel mounting ? when the switch is used in a place where it switch at a tilt of at least 35 degrees from the horizontal surface. (see fig. 1.) ? mount the switch on the panel so that the thickness of packing is 1 mm or below. (see fig. 2.) do not reuse the switch that is once mounted on a panel. neglecting this caution may deteriorate y? manual soldering device: soldering iron 380 ? # m b d l
1 b s u / p b o e s b u j o h n b s l 6 -~ $ 4 " 7 % & |